Tips For Replacing a Window Handle
It is easy to replace your window handle in the convenience of your own home. Follow these tips for smooth operation and a stunning looking finish.
Remove the screw covers from your uPVC handle to expose the screws. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.
1. Measure the Spindle Length
When you're replacing a window handle, it's important to get the size of the spindle right. It could influence the tightness or looseness of the handle and whether the handle locks correctly into the frame of the window. The spindle is the steel shaft that connects to the handle as well as the lock within the window frame. The spindle can be either a standard 8mm cross-section in the industry or the older 9mm versions. The current industry standard is 8mm however this wasn't always the case. When purchasing a new handle, it is essential to verify the measurements.
Remove the handle. This can be done easily by turning the handle to the open position and unwinding two screws that secure the handle (which are usually hidden behind plastic caps that will need to removed). Once the handle is removed, take a measurement from the base to the point at which it ends. This will provide you with the measurements you need to purchase a replacement.
There are many options when you're looking to select a new window handle. From sleek chrome that fits into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more classic Tudor Cottages with curled mongoose tail latches. There are a lot of options, but the most important is to choose the style that is appropriate to your home's style.
Espag handles are usually installed to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, from 58mm up to 62mm. Window handles from Cadenza come in distinct dimensions as they feature an bent blade that is used to operate an interlocking mechanism that is multi-point inside the window.
When selecting a window handle it is important to consider the hand you use to open your door. Inline espag handles can be used for left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Remove the Handle
If the handle is damaged or just worn out the handle of a window that is shattered is a major source of frustration. But the good part is that replacing the uPVC window handle is a simple job that you can do yourself. You only need some basic hand tools and some time to complete the task.
You will need to first open the window, and make sure it's not locked. The next step is to remove the screws that hold the handle in position. Once the screw caps are removed you will be able to remove the handle.
The handle itself is fixed to a spindle within the window frame. Based on the type it is held in place either by a screw or a pin. The most common handle types are inline Espagnolette handles and cockspur handles. Both types of handles are available on casement windows, as well as aluminum ones. They can be locked by using keys to stop unauthorised opening of the window from the outside or by locking them by turning the handle clockwise.
To remove the handle, you will need to use a screwdriver with a flat blade to remove the clip that holds the handle in place. After this is released, the handle will fall off the spindle. After the handle has been removed, you'll have to determine the length of the spindle and make sure that the new handle is compatible with the spindle's length.
Once you have the right size, you can now fix the new handle into the correct position. It is essential to ensure that the handle is securely attached and rotates in the correct direction (clockwise if the handle is open or counterclockwise if the handle closes). It is also important to make sure that it is not installed upside down.
Finally, you should replace the screw cap caps. After you've done this, you can test the handle to make sure that it works properly. It is also recommended to test the locking mechanism by moving the handle until it is locked position and then back to the locked position.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first thing to show signs of wear and wear or damage. This could be due to natural elements or by regular use and sometimes even deliberate damage by opportunistic criminals who might wish to open a locked window and gain entry to your home. However, a simple replacement will solve the issue and stop the issue from occurring again.
UPVC handles may also be difficult to open if the locking mechanism isn't working correctly. It's often possible to solve the problem by replacing the multipoint locking mechanism instead of the entire handle. This could save you money.
After you've removed the old handle, you will need to remove the screws that held it in place. The screws are typically located on the inside of the base of the handle. You may require a screwdriver for this and it's crucial to not over tighten, as this could cause the handle to loosen.
Then, you'll need to find the pins or screws that keep the handle in place. These are usually located on the inside of the handle base. You will need an instrument to remove them. If you want to replace them, you should replace the caps on the screws and check the handle to ensure it functions properly.
When you're ready for installing the new handle, simply align the spindle with the cutout in the window mechanism and screw it in the right position. If you're looking to replace the screws make sure that the handle is in an open position and that any screws are securely attached. After this is done, you're done and can enjoy your new window handle. Hopefully this will help you avoid the need for expensive replacement of your door and window in the future. If you would like more assistance regarding this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Install the New Handle
If you're replacing a damaged handle or simply making it more modern the procedure is easy and can be accomplished in just a few steps. The first step is to determine the type of handle, measure its spindle and know what tools you'll require to complete the job. Always ensure security when working with windows and tools. Be sure to follow the steps and ensure that you have a handle that is safe to use.
The first step is to locate the screws that hold your current window handle in place and remove them, while keeping an adequate grip on the handle itself to prevent it from falling suddenly and result in injury. After the screws have been removed they can be repositioned in a safe place to be replaced later.
Once the old handle is removed, you can now begin to install your new one. The handle needs to be perfectly positioned in order to function correctly and hold the window in its closed position. The next step is to slide the square metal bar on the back of the handle into the hole of the window mechanism, making sure it is securely in place.
The final step is to replace the caps on the screws and then test the handle to ensure that it works. If you are not satisfied with the results or the window doesn't shut or open properly contact our experts for assistance.
Most homes in the UK have uPVC windows. As they are, a lot of them will need to be replaced in the near future because of wear or damage. The process is relatively straightforward and can be done by anyone with some knowledge of DIY. The most important aspect in the success of this procedure is ensuring that you're using a replacement handle that matches the window's size and design. Contact our team if you are unsure of the type of handle you need. They'll be able to guide you through the options.